The high-speed PVC flexible doors of the RAPIDLINE line are designed for intensive use. They adapt to every size and type of application for each industrial sector
high-speed PVC door with two horizontal clear panels, a security camera on the left, and a “CLASS 5 Wind Load Resistance” badge in the upper right corner—ideal for Hangar Shield and other industrial doors.

High-speed PVC door rolling door designed for intensive use and certified in Class 5 for resistance to wind load. Patent Pending EU.

A model of high-speed PVC door, which is highly evolved thanks to the IMVA Industrial Doors experience and technology.

Maximum practicality and speed in opening/closing but with all the safety of insulation and resistance to wind loads.

AR400WR is probably the only one of a kind and ideal for installations where very high performance is required for closing a passage with a rolling door with a uniform PVC curtain.

Standard Dimensions of The Transit Area

Minimum dimensions

W 2000 x H 2000 mm

Application

Ideal for outdoor use even in particularly windy areas

Tear resistance

500 N

Maximum dimensions

W 4000 x H 4000 mm

Opening speed

0,7 m/sec

Tensile strength

4000 N
AR400WR

Standard metal structure

Self-supporting in sheet metal made of galvanized steel pre-painted white RAL 9002, thickness 1.5 mm with profiled plates, fully bolted without welding.

Curtain or cover

Tear-resistant, class 2 fireproof PVC, warped in double weft 900 g/m² with side sealing hinges. At eye level, one row of transparent heat-sealed inspection windows.

Optional

  • 4/5 mm thick fire retardant Class 2 insulated fabric made of PVC. Weight 1400 g/m²
  • Double weft PVC fabric, weight 580g /m², self-extinguishing Class 1

Wind resistance

Certified Class 3 – Class 4 – Class 5 with door closed.

Side Slides:

Profiled in high molecular density polyzene housed inside the jambs equipped with special reinforcements to withstand wind. The polyzene is self-lubricating for perfect sliding of the curtain. They are also equipped with an exclusive lateral adjustment system with springs, for optimal tensioning of the curtain. The guides are equipped with vertical brushes to increase air tightness and can contain cables for the use of infra-red safety light curtains.

Resistance to Bending

100.000 bends without tearing

Tear Resistance:

500 N

Tensile Strength

4000 N

Thermal Resistance:

– 30 °C to + 70 °C

Roller Shaft:

Diameter 120 mm supported by ball bearings

Drive unit

three-phase motor 400V-50 Hz with electric brake suitable for intensive use. Digital limit switches with absolute encoder incorporated in the gear unit but easy to inspect/adjust. Thermal circuit breaker for protection against voltage surges.

Emergency procedure

release rod for manual opening of the curtain in case of power failure. When the rod is engaged, a safety micro-switch automatically cuts off power to the motor.

CE UNI EN 13241-1 marking data

release rod for manual opening of the curtain in case of power failure. When the rod is engaged, a safety micro-switch automatically cuts off power to the motor.
  • Operating speed – up to 0.7 m/sec
  • Operating temperature -20°C, + 50°C
  • Wind load resistance – Class 3, 4 and Class 5 (certified with door closed)

Control panel

with 400 V power supply and 24 V auxiliary power supply. IP 55 protection rating. It is equipped with easy-to-remove motherboard.

Push-Button Panel:

Membrane push-button panel with “Opening — Closing — Pedestrian” button (partial opening) and EMERGENCY stop mushroom-shaped push-button.
Pre-wired electrical system: 400/24 V separate voltage lines (as required by regulatory standards); infra-red safety light curtains, flashing light, electric brake, encoder and motor are already connected to the junction box fitted with cables prepared for connection to the control panel.

Side gaskets

 in yellow PVC inserted in the jambs to facilitate curtain sliding and the insertion of cables for the installation of photocells or infra-red safety light curtain. Vertical brushes to increase air tightness.

Please note: for high-speed doors over 20 m², we recommend the use of the automatic counterweight opening system.

Push-button panel

membrane push-button panel with “Opening — Closing — Pedestrian” button (partial opening) and EMERGENCY stop mushroom-shaped push-button. pre-wired electrical system: 400/24V separate voltage lines (as required by regulatory standards); photocells/safety light curtains, flashing light, electric brake, limit switch and motor are already connected to the junction box fitted with cables prepared for connection to the control panel.

Colours Available

A color and material selection chart for curtains, industrial doors, and structures, showing various RAL-like shades, textures, and standard or optional finishes, each with corresponding codes and labels—ideal for Hangar Shield applications.

The curtain may slightly differ from the corresponding RAL paint