The high speed PVC flexible doors of the RAPIDLINE line are designed for intensive use. They adapt to every size and type of application for each industrial sector
High speed door designed to close indoor areas with a modest workflow. Self-repairing (or self-retracting) function.
Evolution of the AR 600 high speed door model, the AR 300 technical closure is suitable for small internal openings where a normal workflow is expected but without giving up the self-repair function of the closure. The high speed door can therefore immediately resume operation thanks to the automatic restoring of the curtain. This model is excellent value for money.
Standard Dimensions of The Transit Area
Minimum dimensions
W 2000 x H 2000 mm
Application
for internal use only
Tear resistance
500 N
Maximum dimensions
W 3500 x H 3400 mm
Opening speed
0,7 m/sec
Tensile strength
4000 N/50 mm
Standard metal structure
Top cross member in die-bent sheet metal made of galvanized steel thickness 1.5 mm, non-self-supporting, equipped with fixing plates to be bolted. Galvanized steel lateral jambs, fitted with slotted fixing brackets for adjustment.
Curtain
Tear-resistant, PVC, 900 g/m². At eye level, one row of transparent heat-sealed inspection windows. Electrowelded side sealing hinges.
Optional
- 4/5 mm thick fireproof Class 2 insulated fabric made of PVC. Weight 1400 g/ m²
- double weft PVC fabric, weight 580 g/m², self-extinguishing Class 1
Side slides
Profiled in high molecular density polyzene housed inside the jambs. The polyzene is self-lubricating for perfect sliding of the curtain, designed with a special cut to let the curtain slip back in place in case of breakage (self-repairing system). They are also equipped with an exclusive lateral adjustment system with springs, for optimal tensioning of the curtain.
Resistance to bending
100.000 bends without tearing
Wind resistance
Class 1 (30Kg/ m²) ~ 40Km/hr
Thermal resistance
20 °C to + 50 °C
Roller shaft
Diameter 90 mm supported by ball bearings. Guard in galvanized sheet metal (painted in the colours indicated on request)
Drive unit
Three-phase motor 400V-50 Hz with electric brake suitable for intensive use. Limit switch incorporated into the gear unit, easy to inspect and adjustable. Thermal circuit breaker for protection against voltage surges.
Gear reducer
With long-life lubrication and maintenance-free. Fitted directly on the roller shaft or driven by a transmission chain.
Emergency procedure
Release rod for manual opening of the curtain in case of power failure (maximum height 2500mm). When the rod is engaged, a safety micro-switch automatically cuts off power to the motor.
Please note: for high-speed doors over 20 m², we recommend the use of a backup battery.
CE UNI EN 13241-1 marking data
- Operating speed – up to 0.7 m / sec
- Operating temperature -20°C, + 50°C
- Wind load resistance – Class 1
Control panel
With 400 V power supply and 24 V auxiliary power supply. IP 55 protection rating. It is equipped with easy-to-remove motherboard.
Push-button panel
Membrane pushbutton panel with “Opening — Closing — Pedestrian” button (partial opening) and EMERGENCY stop mushroom-shaped pushbutton. Pre-wired electrical system: 400/24V separate voltage lines (as required by regulatory standards); photocells, flashing light, electric brake, limit switch and motor are already connected to the junction box fitted with cables prepared for connection to the control panel.
Colours Available
The curtain may slightly differ from the corresponding RAL paint
