The high-speed PVC flexible doors of the RAPIDLINE line are designed for intensive use. They adapt to every size and type of application for each industrial sector
High-speed door designed for work environments with very intense workflow with self-repairing function.
AR 600 is a high-speed door designed to meet the needs of industrial sectors with high-performance requirements, a particularly heavy use of the passage and operating safety in all conditions are required.
This model has a high opening speed reaching 1.5 m/s and, if bumped, can immediately resume operation thanks to the special rearming system of the curtain (it returns inside the guides automatically).
Standard self-repairing and “soft start & stop” function.
Standard Dimensions of The Transit Area
Minimum dimensions
W 2000 x H 2000 mm
Application
internal/external
Tear resistance
500 N
Maximum dimensions
W 6000 x H 5000 mm
Opening speed
1,5 m/sec
Tensile strength
4000 N
Standard metal structure
top cross member in die-bent sheet metal made of galvanized steel -prepainted white RAL 9002, thickness 1.5 mm. Galvanized steel lateral jambs, suitably profiled to facilitate installation without the use of external plates, equipped with slots for adjustment.
Curtain or cover
Tear-resistant PVC, 900 g/m². At eye level, one row of transparent heat-sealed inspection windows.
It is possible to create entire transparent sectors with variable dimensions depending on the width of the opening
Optional
- 4/5 mm thick fireproof Class 2 insulated fabric made of PVC. Weight 1400 g/m²
- double weft PVC fabric, weight 580g /m², self-extinguishing Class 1
Side slides
profiled in high molecular density polyzene housed inside the jambs. The polyzene is self-lubricating for perfect sliding of the curtain and designed with a special cut letting the curtain slip back in place in case of breakage (self-repairing system). They are also equipped with an exclusive lateral adjustment system with springs, for optimal tensioning of the curtain
Resistance to bending
100.000 bends without tearing
Wind resistance
certified class 2 (45 Kg/m²) with closed door
Thermal resistance
30 °C to + 70 °C
Roller shaft
diameter 90/120 mm supported by ball bearings
Drive unit
three-phase motor 230 V-50 Hz with electric brake suitable for intensive use. Digital limit switches with encoder incorporated into the gear unit, easy to inspect and adjustable. Thermal circuit breaker for protection against voltage surges.
Gear reducer
with long-life lubrication and maintenance-free. Fitted directly on the roller shaft or driven by a transmission chain.
Emergency procedure
release rod for manual opening of the curtain in case of power failure. When the rod is engaged, a safety micro-switch automatically cuts off power to the motor.
Please note: for high-speed doors over 20 m², we recommend the use of a backup battery.
CE UNI EN 13241-1 marking data
- Operating speed – up to 1.5 ÷ 2 m/sec
- Operating temperature -20°C, + 50°C
- Wind load resistance with door closed – Class 2
Control panel
with external display equipped with inverter with acceleration and deceleration ramps, 230V power supply and 24 V auxiliaries. IP 55 protection rating. It is equipped with easy-to-remove motherboard and separate inverter
Push-button panel
membrane push-button panel with “Opening — Closing — Pedestrian” button (partial opening) and EMERGENCY stop mushroom-shaped push-button. Pre-wired electrical system: 230/24 V separate voltage lines (as required by regulatory standards); photocells/safety light curtains, flashing light, electric brake, encoder and motor are already connected to the junction box fitted with cables prepared for connection to the control panel
Colours Available
The curtain may slightly differ from the corresponding RAL paint
