SUPERTHERMIC insulated industrial doors adapt to many customizations, for every type of installation and architectural style
Large industrial building with Hangar Shield industrial doors and small windows, set against a mountain backdrop under a partly cloudy sky.

Flux Corner is a single-sided or double-sided industrial sliding-revolving door for small, medium or large sizes, with manual or chain-driven motor drive.

The sliding industrial door features great dimensional flexibility and a specialized structure and mounting system, making it suitable for all industrial sectors with wide passages and diverse storage requirements.

The FLUX CORNER adopts a linear guide movement system with 90° curves for lateral sliding.

NOTE: the SUPERTHERMIC FLUX CORNER industrial door is also available in the evolved ISOMAX thermal cut version with height limitations

Available in only one version:

  • Floor-supported sliding door, doors with an upper track equipped with an anti-derailment system and supported by “U” grooved wheels that slide on a lower track embedded in the floor

Door leaves:

Self-supporting monostructures (variable dimensions – Maximum height 10000 mm)

Door Leaf Thickness:

  • 55 mm x 6000 mm height
  • 65 mm x 8000 mm height
  • 80 mm x 10000 mm height
  • 120 mm x 12500 mm height
Three cross-section views of Hangar Shield wall panels for industrial doors, with thicknesses labeled as 55 mm, 65 mm, and 80 mm from left to right.
Diagram of the Hangar Shield sliding-turning door system with six panels, a maximum width of 8,700 mm and a height of 6,000 mm, illustrating a 90° corner opening—ideal for large-scale industrial doors.
  • Door leaf width: Maximum 1200/1450 mm
  • Door leaf height: 6000/8000/10000 mm
  • Door leaf connections: Black-painted hinges fixed to the load-bearing structure via contrasting plates, perfectly concealed by the seals. This gives the door a special “folding effect” that allows for the perfect aesthetic combination of different door concepts within the same building.
  • Maximum height: 6,000 mm as per catalogue. Longer non-standard heights available on request.
  • Maximum length: 8,700 mm (6 leaves) as per catalogue. Longer non-standard lengths available on request.

Leaf configuration:

Sliding-rotating at 90° (FLUX CORNER model)

  • Insulation:  fully self-extinguishing Class B2 CFC-free (Chlorine, Fluoride, Carbides) polyurethane insulation. 3 high-pressure foaming cycles with a minimum density > 40 Kg/m³
  • Perimeter frame:  dovetail-shaped profile, 2 mm thick

Double-skinned coating of galvanized pre-painted steel sheet with the Sendzimir process:

  • Plain, thickness 0.8+0.8 mm
  • Embossed, thickness 0.5+0.5 mm

Air Tightness:

  • Black EPDM anti-aging seals between panels
  • Nylon brush between panels and lintel
  • Easy-to-replace nylon brush with aluminum support profile between panels and side wall
  • Black nylon brush with black pre-coated support profile on the floor

Opening/Closing:

  • Manual
  • Motorized

Sliding system via top rail made of very thick galvanized steel with fixing and adjustment slots, to be fixed to the wall with wall plugs (not included); and adjustable roller carriages.

CE Marking Mata:

  • Wind load resistance, class 4
  • Thermal resistance, 1.53 W/m² K (calculated value for 4-leaf door 5000×5000)
  • Average noise reduction, 22 dB (not certifiable)
  • Fire resistance, B-S1, d0
  • Durability 20,000 cycles

Extras:

  • Pedestrian-hinged door
  • Inspection window with rubber surround profile, into which 8/9 laminated glass with rounded corners is inserted
  • Inspection window with black aluminium surround profile, into which thermally insulated double-glazed or laminated glass with 90° corners, up to a maximum thickness of 40 mm is inserted
  • ventilation grille with fixed slats. Dimensions 600 x 300 H or 1000 x 600 H
Go to the EXTRAS page ››

Application:

  • Fixed installation on interior or exterior walls with sliding rails fixed to the floor

Colours:

Slatted panel (vertical ribs, 160 mm spacing)

  • Smooth sheet metal: white RAL 9002, grey RAL 9006, green RAL 6005, blue RAL 5010, red RAL 3000, brown RAL 8019, grey RAL 7016, wood tone SL65
  • Embossed sheet metal: white RAL 9002, grey RAL 9006, green RAL 6005.

Painting in other RAL colours available on request

A plain off-white or light beige background with no visible objects or patterns, reminiscent of the sleek, minimalist look often found in spaces with industrial doors such as the Hangar Shield.

RAL 9002

White
A plain, uniform light gray surface with no distinguishable patterns or features, resembling the sleek finish often found on Hangar Shield industrial doors.

RAL 9006

Grey
A solid rectangle filled with a dark green color, resembling the sturdy look of Industrial doors, with no visible patterns, textures, or objects.

RAL 6005

Green
A solid red square fills the entire image, reminiscent of the bold color often used on industrial doors, like those in a Hangar Shield system.

RAL 3000

Red
A solid dark blue rectangle fills the entire image, evoking the strong, reliable presence of Industrial doors.

RAL 7006

Gray
A solid blue square with no visible patterns or objects, reminiscent of the sturdy simplicity found in industrial doors or a Hangar Shield.

RAL 5010

Blue
A solid brown square fills the entire image with no visible patterns or textures, resembling the sturdy appearance of Hangar Shield industrial doors.

RAL 8019

Brown
Close-up of a white textured surface with a subtle wavy, raised pattern, often seen on Industrial doors like the Hangar Shield.

RAL 9006

Stucc 9006
Close-up view of a textured green surface with a wavy, repeating pattern, reminiscent of durable materials used in Hangar Shield industrial doors.

RAL 6005

Dark Green
Close-up view of a brown wood surface with visible grain and texture running vertically, reminiscent of materials used in industrial doors by Hangar Shield.

SL65

Wood Colour

Caution/Technical Note: Choosing a dark color can cause a significant temperature difference of more than 40°/45°C between the interior and exterior (on the sun-exposed side). This can cause deformation of the door, which can lead to separation of the steel sheet from the insulation material under prolonged sun exposure. This is not due to manufacturing defects, but rather to physical-mechanical expansion. Therefore, the use of dark colors is not recommended, especially in hot and sunny climates.

Painting in the other RAL colours available on request.

Metal rails are installed on a concrete floor, curving from an open doorway with industrial doors around the corner of a blue-walled room, shown from two angles.
Two close-up photos show a blue Hangar Shield sliding partition suspended from a curved metal track on a ceiling structure with exposed beams and pipes, highlighting its industrial doors design.
Large indoor sports hall with a high ceiling, featuring a tall Hangar Shield partition wall, metal framework, and a small industrial door at the lower right side.
Large closed industrial doors with a small access door open at the bottom right; the building features a blue horizontal stripe near the top, embodying the robust protection of Hangar Shield.
A tall, fully extended Hangar Shield movable partition wall divides an empty industrial space; a yellow scaffold stands on the left side near the wall, exemplifying advanced industrial doors in action.
A large gray industrial building features tall, closed industrial doors and a yellow circular Hangar Shield sign with the letter "F" on the left side.
Large industrial building with Hangar Shield industrial doors and small windows, set against a mountain backdrop under a partly cloudy sky.